2 component plastic filler to fill and level irregularities in surfaces of all types of plastic.
Suitable for surfaces of steel, aluminum, wood, concrete and polyester, which are subject to vibrations.
Plastic repair putty is very elastic and easy to sand. Plastic repair filler will be repaintable with all paint systems.
Thanks to its high temperature resistance, this filler is one of the few of its kind that is extremely suitable as a repair and filler before powder coating finish.
The filler has a very fine structure. Plastic repair putty is resistant to chemicals and weathering and has excellent adhesion and can be applied in layers up to 10 mm thick for wet painting.
With powder coating, we advise to apply and cure as thinly as possible and preferably in several thin layers.
Overview:
Product: Plastic Repair Putty / Plastic Repair Putty.
Packaging: Tin with filler & Tube Harder and spatula
Content: 420 grams
Colour: Grey
Gloss level: N / A
Suitable for: Plastic, steel, Aluminum, precious metals, Wood, Concrete, Polyester
Max temp 180 ° C
Processing temp +15 ° C max + 25 ° C
Process after mix harder within 3 - 5 Min
Drying time: for powder coating min 3 hours
Drying time for wet paint about 1 hour
Item no. CR000059
>> Note!: <<<
- Plastic Repair Putty is Not Suitable for parts made of polyethylene (PE) and polypropylene (PP)
- Ensure that aluminum and alloy products have been gassed at 230 ° C for 30 min prior to filling
- Do not use powders that cure above 180 ° C.
- Before treatment, test the combination of the products to be used with each other. on test pictures.
- Filler must be applied in thin layers and allowed to set. after final curing and sanding, it must first be heated to the final powder coat powder curing temperature prior to powder coat treatment.
This should be done slowly in temperature steps from ambient temperature in the oven to the final powder curing temperature, this is to prevent cracking. If no defects arise, you can start the powder coat treatment.