Copper metallic Flake for addition of powder coating, paint and Plasti Dip

Copper metallic flake additive for powder coating and wet painting
Our Copper metallic flakes are a great way to add sparkle to any coating finish.
Just like the metallic paint on motor vehicles, our flakes are of the highest quality.

Our Hexagon flakes are easy to spray and solvent resistant enough to use in two-part epoxy paint.
They are heat resistant up to 400 degrees F.
They can be used on many different media and our micro-metal flakes are known for providing strong brilliance and excellent sprayability.


All our flakes are perfectly solvent resistant, so they can be mixed with all coatings without fading or bleed like the standard glitters in the hobby shops do.


Processing advice:

When using a base coat, our .004 "Micron flakes can treat an entire middle class car using 75 grams of flakes.
As a basic ratio you can keep 5 grams at 250 cc / gram
But in the end you decide which ratio with more or less flakes gives the desired effect for your finish.
So always test beforehand to the desired result and mix the ratio to your own wishes.


DISCLAIMER

Colors shown on our site may differ from the product supplied.

This has to do with the software and hardware of your screen and no rights can be derived from it. The substrate and pretreatment also determine the final result. Images are for illustrative purposes only.
All our powders and additives are excluded from the right of return.